• Dangerous transportation
• Chemical transportation

Dangerous goods storage

The storage of dangerous goods of categories 2, 3, 4, 5, 6, 8 and 9 can be provided in Hong Kong and the Pearl River Delta

Declaration of dangerous goods

The company has a special person to be responsible for the review of dangerous goods before customs declaration, prevent in advance and reduce the risk of customs clearance. Any problems encountered in the customs declaration process shall be explained by special personnel at the first time.

Overseas distribution of dangerous goods

We are members of WCA, more than 300 overseas have cooperated with agents, and can provide DDU and DDP services for dangerous goods in most countries around the world.

Consultation on dangerous goods

If the customer cannot confirm the relevant dangerous goods information and provide your product description, our company will help the appraisal agency to confirm whether it is dangerous goods and the relevant UN no, calss and PG and carry out transportation explanation according to IMDG requirements.

Dangerous goods Trailer

Qualified professional dangerous goods transportation vehicles and professional transportation personnel can provide door point services for category 2-9 dangerous goods nationwide.

Air transport of dangerous goods

Air transport of dangerous goods is a kind of transportation mode which uses aircraft or other aircraft as carrier, also known as air transport, or air transport. Air transportation has won a considerable market with its fast, safe and on-time and super efficiency, greatly shortens the delivery time, and plays a great role in accelerating the capital turnover and circulation of logistics supply chain. Compared with sea transportation, the cost of air transportation is relatively high, so air transportation is generally the more urgent goods, or air transportation is selected if the road and sea transportation cannot meet the requirements of customers. In the transportation of dangerous goods, it occupies the vast majority.

Booking

Can undertake 2, 3, 4, 5, 6, 8, 9 categories of dangerous goods by air. Familiar with the requirements and process of dangerous goods booking of various airlines, has a number of Airlines (EK, mu, CX, LH, KL, AF, FM, CA, etc.) booking channels

To undertake the global chemical, dangerous goods transport

Packaging scheme of dangerous goods

According to the situation of the goods and the requirements of IATA DGR, the packaging team will make the packaging scheme in line with the air transportation;

Dangerous goods declaration

The operators have the dangerous goods operator certificate issued by IATA and the dangerous goods qualification certificate issued by IATA

Supply of dangerous goods packaging materials

The company can provide all kinds of UN packaging of boxes, barrels, cans and bags. And a variety of labels and other packaging materials

Identification of dangerous goods

Provide identification report of dangerous goods and non dangerous goods.

Transportation of fresh and perishable goods

The transportation of fresh and perishable goods refers to the transportation of goods that need special means of transportation or special measures to maintain a certain temperature and humidity or supply certain feed, water supply and water exchange to prevent death and deterioration.

According to the requirements of PCR rules, we can undertake all kinds of fresh perishable goods air export business. The products include fresh and frozen aquatic products, biological products (agents), precision instruments, film, fixer, cosmetics and other goods that the shipper considers necessary for temperature control and protection. We have a professional understanding of the special transportation of medicine. The company has strict management requirements for temperature, time and storability. In order to ensure that the goods are at the most appropriate temperature during transportation, the company provides various methods. In addition, our company has conducted in-depth research on packaging materials and thermal insulation materials, and further expanded the scope of selection. For goods that can not be frozen or exposed, we can meet the various requirements of customers. On the packaging of goods, Deyi can provide ice bags, dry ice, labels, and various packing cases.

Characteristics of transportation of fresh and perishable materials:

1. Strong seasonality and large volume change 2. Urgent delivery time 3. Some goods requiring special care during transportation

Transportation conditions of fresh and perishable goods:

1. Keep suitable temperature condition 2. Provide suitable humidity 3. Need proper ventilation 4. Keep good sanitary condition

Service network throughout the country and Europe, the United States, Asia, the Middle East, India and other countries and regions.

Can provide one-way short rent and long rent business, the main box type T11 T14 T20 T22 T50

Products suitable for shipment are:

1. Food: edible and medical grade alcohol, fructose syrup, sorbitol, vitamin E oil, concentrated apple juice, grape juice, etc

2. Common liquid chemicals with high quality requirements, such as transformer oil, caprolactam, lubricating oil, etc

3. Hazardous liquid chemicals:

cost reduction

A 20 foot standard tank can carry 45% more liquid goods than a 20 foot standard sea container full of drums, which means "more shipping at the same freight", thus reducing the land and sea transportation costs of unit goods. In addition, the use of tanks can save the cost of purchasing and discarding drums. These are two direct cost savings in the transportation process. And can be used repeatedly for a long time, and according to the volume requirements, external long-term leasing.

The loading and unloading process is simple

The use of ISO tank will not have expensive and time-consuming small bucket filling process, and there is no cost for the purchase, operation and waste disposal of the drum. Compared with barreled transportation, it can reduce the pollution chance of goods and the waste and loss caused by the residual goods in the barrel after unloading.

Other dangerous goods transportation business

1. Dangerous goods maritime declaration, air transport declaration, etc;

Huaxin International freight company has professional maritime booking operators, dangerous goods declaration officers and loading supervisors. Can provide professional dangerous goods logistics services for customers. Provide the most effective service in operation, documents, inspection and customs declaration. Frequently cooperate with customers to export hand washing liquid, air freshener, ribbon, lithium hydroxide, diamine, insecticide, fragrance, dew, resin, antiknock agent, aerosol, release agent, sodium fluoride, copper sulfate, nail polish, water chiller, health ball, spray paint, refrigerator, match, table tennis, paint, chlorine, lithium battery, polystyrene, cleaning agent, propane, dust remover, Liquid ammonia, adhesives, silane, barium carbonate, manganese sulfate, perfume, paint, snow spray, nickel hydrogen battery, lead acid battery and other dangerous goods......

2. Declaration and inspection of import and export of dangerous goods;

Shenzhen Huaxin International Freight Forwarding Co., Ltd. is an international freight company, focusing on the transportation of dangerous goods for 12 years. For 12 years in China, the import and export transport industry of dangerous goods has been under the control of the price evaluation, import filing, import customs clearance and import transportation.

3. To apply for identification report, dangerous package certificate and other application procedures on behalf of the company;

Huaxin provides a representative hazardous material identification report, and makes a comprehensive appraisal on the explosive, flammable, oxidation and toxicity of all kinds of dangerous goods and goods, and then issues a report to provide more convenient bedding for the later transportation;

4, to provide a full set of UN cartons, UN barrels, custom foam boxes, dangerous marks, filling adsorption, reinforcement and so on;

We provide dangerous goods and various packaging products. You can choose the best packaging materials for your products. We also sincerely provide you with the best products!

Reinforcement of dangerous goods

The requirements for container reinforcement in Europe and America are constantly improving, and the port inspection is increasingly strict. Are you worried about the high penalty for your goods? Due to improper reinforcement, the goods in the container become disordered. Customer complaints and claims make you upset?

Introduction to ty gard

Ty gard2000 is designed as a 16 inch wide elastic belt, which is laminated by high-strength pressure-sensitive adhesive acrylic adhesive, which enables the goods to be fixed on the container only and can be removed without damage to the surface of the goods without any trace. It is suitable for the packaging of drums, elastic bags, pallet products t and paper rolls. Ty gard2000 has excellent adhesion in a wide range of temperatures. The complete fixed system consists of ty gard2000, ty patch and ty tool kit. The installation process is very simple and can be completed in a few minutes. It fully meets the advanced logistics concept of safety and environmental protection and economic application, and plays an outstanding role in exporting multi-modal transport goods in Europe and America.

With the increasing requirements of container reinforcement in Europe and America, the port inspection is also increasingly strict. The traditional methods of wood reinforcement, binding belt and metal buckle of domestic shippers can not meet the strict requirements of port authorities in Europe and America for chemical products. Due to the increasing number of cases being detained in the destination port due to improper reinforcement, domestic shippers bear the high cost of wharf operation and storage, box transfer and reinforcement, which usually reaches thousands of dollars. Meanwhile, customer complaints and disputes are difficult to solve, and the related costs are astronomical figures. Ty gard American reinforcement system is safe, convenient to use and widely used in various packaging.

Five reasons for choosing ty gard

1. Advanced.

The requirements for container reinforcement in Europe and America are constantly improving, and the port inspection is increasingly strict. Are you worried about the high penalty for your goods? Due to improper reinforcement, the goods in the container become disordered. Customer complaints and claims make you upset?

2. Authority

Exclusive patent products made of aviation materials;

In 1981, it passed the test and certification of American Railway Association in 1986;

The original imported from the United States, ty gard 2000 is adopted in the United States. It has been approved by three major American railway companies and is also approved by the American Association for dangerous goods (AADA).

It has passed the certification of the most stringent authority on safety reinforcement requirements in the world, including the relevant provisions of the American Railway Association (ARR), North American explosive substances Administration (b.o.e), federal automotive transport safety administration, US Coast Guard, the United States Department of transportation and the international maritime dangerous goods transportation rules.

3. Safety - the back glue of Shenji, exclusive patent.

The most magical thing about ty gard: ty gard adhesive is pressure sensitive, which gives it the safety of goods tightly protected during transportation, and it can be easily removed without any trace. At the same time, ty gard gum can withstand high and low temperature, which makes it very suitable for the harsh temperature environment in transportation.

4. Time saving

Convenient installation, labor saving and time saving; A worker is trained for a few minutes at a time

5. Reduce logistics cost

Help you to avoid the huge loss and image loss caused by the problems of the locked case, unpacking and reloading, and reduce the logistics cost from the whole.

Wood reinforcement

1. Two skilled workers for more than half an hour;

2. No specific standards can be ensured;

3. Unloading and unpacking is difficult, and the customer is not welcome;

4. After the bumps of transportation, there will be a gap between the goods which will lead to displacement;

5. Wood is connected with nails, so it is difficult to ensure that there is no nail head; A large number of nails are also potential threats to the safety of the goods packaging; 6. Brittle materials are easy to break when the ship bumps and trains are spliced;

7. The elastic material easily breaks the packing of goods and causes the packaging deformation;

8. Without clear reinforcement scheme, it is difficult to grasp the material use

9. Time consuming and labor consumption, which affects the packing efficiency;

10. Because of the use of logs, there will be fumigation problems;

11. If the goods are loaded close to the door, they can not be reinforced with wood;

12. It is not conducive to environmental protection to reinforce with wood.

Ty gard safety reinforcement system

1. A worker is trained for a few minutes at a time;

2. Standard process operation;

3. No fumigation is required;

4. Beautiful, cut off can unload, customer welcome.

5. The empty container requires only less material.

6. The reinforcement material is close to the container wall, and the reinforcement material and cargo do not have any adhesive adhesion.

7. The cost is about 10% less than all wood materials.

8. Special case with smooth wall and no nails on wooden floor is suitable for ty gard.

9. Ty gard can maintain normal tensile and solid properties from 20 degrees to 80 degrees above zero.

Declaration of dangerous goods

Scope of customs declaration and inspection

1. export customs declaration: simple and convenient. Wide range of goods: including cloth, clothing, shoes, bags, leather products, plastic products, hardware products, electronic appliances, toys, ceramics, furniture, bamboo, wood, rattan, crafts, etc. You (factory) only need to send the commodity name, quantity, weight, value, packing form and other information to us. (if it is necessary to send it to the company in advance), we can handle all the documents required and handle the relevant procedures in a safe and timely manner.

2. import customs declaration: various forms, wide door, including normal trade agent customs declaration, our company tax agent customs declaration, and bulk express customs clearance.

3. all day one-stop service: the company not only agent customs declaration, but also agent inspection, origin certificate (FA, CO), fumigation, disinfection, transportation, storage and other business.

Customs declaration and inspection business operation process

1. to pass the customs smoothly, please fill in the specific name, accessories and materials of the goods, and do not only fill in the words "accessories" or "samples".

2. the sender shall fill in the full name. The sender must sign the waybill and fill in the actual date of the delivery.

3. the contract terms of express waybill (scope of liability, maximum amount of liability insurance, difficult parts) shall be indicated on the back of the express delivery company. Please read this clause carefully before sending it.

declare at customs:

1. customs declaration shall generally go through the following four links: declaration, inspection, taxation and release.

2. at present, the paperless customs declaration process has been realized at all ports. The client prepares electronic documents in PDF format, which requires clear and complete contents of the documents, and has the official seal of the business unit. Because the customs implements paperless commodity inspection, it is necessary to declare normally. Therefore, the inspection authorization and the sea bill of lading are required. If it is a legal commodity, the original certificate of origin is also required, The process of paperless customs clearance for the original foreign documents such as the dynamic inspection certificate after the plant inspection certificate.

3. the agent customs broker uses the upgraded input system to conduct electronic entry.

4. send electronic information to customs and send electronic documents at the same time

5. confirm the tariff amount after electronic receipt, and pay tax by online payment

6. electronic release after customs review

7. stamp customs release seal on d/o sheet on site

Imported goods: first apply for inspection, and then declare customs

1. the documents required for the first inspection of non legal commodity inspection include: customs declaration, invoice, packing list, packing certificate (for example, non wood packaging certificate provided for non wooden packaging) the first pre entry of inspection application document (Jiucheng document system) for legal commodity inspection, and also the inspection authorization (original with official seal and legal person seal), After the commodity inspection is completed with the special documents (such as 3C compulsory certification) required, the original waybill shall be stamped with the commodity inspection seal. If the customs clearance order is required, the import goods customs clearance document shall be drawn.

2. general documents required to be provided for customs declaration: customs declaration form, original waybill, invoice, packing list, declaration authorization, and attached documents need to provide certificate a of import goods clearance form, and other documents required to be provided for duty-free import goods need to provide tax exemption certificate (such as tax exemption manual for processing trade, etc.).

3. after the customs clearance is over, the customs shall directly stamp the goods with the release seal for general taxation, and the customs shall draw the tax form (import tariff and import value-added tax), and after paying the tax, the customs shall stamp the release seal after the Customs has completed the verification and verification of taxes. At this point, the import clearance procedures of imported goods are all over.

Export goods: inspection application

1. if HS tax number needs to provide (b) the customs clearance certificate for export goods, the customs declaration unit shall provide the certificate (or voucher) of export goods exchange by the exporter, the declaration authorization (with official seal and legal person seal) and go through the formalities of certificate exchange at the Commodity Inspection Bureau and the customs clearance form (b) of export goods.

2. customs declaration: provide basic customs declaration documents: original of waybill, customs declaration form, invoice and packing list (all of which are original with company seal), declaration authorization (original, company seal and legal person seal). If the verification of export collection is required, the verification sheet of export collection shall also be provided. The attached documents need B certificate B for import goods clearance.

3. after customs clearance and release, the customs shall directly stamp the release seal on the waybill to conclude the export clearance procedure of export goods.

Precautions for customs declaration and inspection business operation

1. the Customs Law stipulates that the consignee of imported goods, the consignor of the export goods and the owner of the inbound and outbound goods are the tax payers of the customs duties. At the same time, it also stipulates that enterprises with the right to conduct import and export business and customs clearance enterprises approved to register are also legal taxpayers.

2. do not fill in and miss relevant information in error to ensure the data is accurate and complete.

3. the client shall pay attention to whether the goods of the country or region with which bilateral agreements are signed with China require preferential tariff

dangerous articles package

1. the function of packaging

Prevent contact with rain, sunlight, wet air and impurities, and chemical reaction;

Reduce the collision, vibration, friction and extrusion during transportation, and ensure safe transportation;

Prevent the goods from leaking, volatilizing, and contact with incompatible goods, which may cause accidents;

Easy to handle, handle and keep.

2. packing category

All dangerous goods except categories 1, 2, 6.2 and 7 may be transported in three levels depending on their degree of risk:

Class I packaging: suitable for the high dangerous goods;

Class II packaging: suitable for the internal loading of goods with moderate risk;

Class III packaging: suitable for the low-level dangerous goods.

3. The general requirements of packaging should be adapted;

The package should have certain strength and be able to withstand the general risks of waterway transportation;

The sealing of the package shall conform to the nature of the dangerous goods;

There should be proper liner between inner and outer packing;

The package should be able to withstand the temperature and humidity changes within a certain range;

The weight, specification and type of the package shall be convenient for loading, unloading, transportation and storage (according to the provisions of the international dangerous goods code, the maximum volume of the package is 450 liters and the maximum net weight is 400 kg)

4. Marking and marking of packages

Each package containing dangerous goods shall be marked with a durable mark showing the correct shipping name of the contents, and if there is a corresponding UN number, it shall also be marked.

All packages containing dangerous goods shall be provided with durable marks showing the characteristics of the dangerous goods inside. The logo on the package, according to the provisions of the international dangerous goods code, will not fall off after being immersed in seawater for three months, and the design and text are still clear and legible.

Mark size: the mark on the package shall not be less than 100x100mm

The marks on containers and movable tanks shall not be less than 250x250mm

How to use the logo: Box: at both ends; Barrel: on the end or body of the barrel; Container: it is located on the four sides of the container, and the secondary sign should usually be displayed on the lower left side of the main sign.

5. Designation code and marking of packing type

1 -- barrel 2 -- wooden Pipa barrel 3 -- can 4 -- case 5 -- bag 6 -- compound package

Packaging material (Latin alphabet)

A -- Steel B -- aluminum C -- natural wood D -- plywood F -- recycled wood G -- fiberboard h -- plastic L -- Textile m -- paper, multilayer P -- glass, porcelain and coarse pottery

Contents of package marks

(1) United Nations packaging symbol;

(2) Type code of package;

(3) Packaging (x) is used for I, II and III packaging; Y is used for class II and III packaging; Z for class III packaging) and the relative density of the liquid (the maximum amount of solids in kg);

(4) The hydraulic test pressure (s for solid) of inner package is expressed by the test pressure accurate to 10KPA;

(5) The last two digits of the year in which the package was manufactured / repaired (the month should be marked for 1H and 3H);

(6) The country of approval of the packaging / or repair (in the form of internationally accepted motor vehicle identification symbol);

(7) Manufacturer / repairer code or authorized code.

(8) If it is repaired, there should be "R" and "L" when applicable.